Carpentry work
You must have a licence or certificate to do carpentry work. You need the required qualifications and experience before you apply.
Key information
- In NSW, you need a contractor licence to do any residential building or trade work, including carpentry, which is valued at more than $5000 in labour and materials (including GST).
- There are different types of licences and certificates available depending on the work you need to do.
- You must have the right qualifications and experience before you can apply for a licence or certificate.
- You can apply for a 1, 3 or 5 year licence or certificate.
What is carpentry work?
Carpentry work is trade work.
Carpentry means cutting and placing timber (or timber composites) for on-site construction work to put up framing or fix components or assemblies used in construction work, such as stairs, windows, doors, floors and wallboards (excluding plaster boards which is dry plastering work).
Carpentry work includes:
- setting up metal framing and constructing formwork to prepare for concreting
- minor non-structural concreting for a dwelling where that concreting is needed to support carpentry work
- concreting for footings/structural support for outdoor construction such as for pergolas, timber decks, timber and metal fencing. (It does not include concrete paths, slabs or similar. You would need a licence in general concreting.)
- exterior wall cladding (including non-structural stone veneer facing or cladding, but excluding brick)
- curtain walling
- internal timber cladding of walls and ceilings and non-structural stone cladding of internal walls
- non-habitable outdoor shelters or structures (excluding brick or stone) such as pergolas, gazebos and the like, but not including garages, sheds or carports.
- skylights
- awnings
- prefabricated glass fences
- timber retaining walls not requiring approval under the Local Government Act 1993 (work involved in retaining walls that require such approval is work within the category of structural landscaping or general building work).
To learn more about what is considered carpentry see the definition in schedule 4 of the Home Building Regulation 2014.
You must have a contractor licence to carry out, advertise or contract for building or trade work that is valued at more than $5,000 in labour and materials (including GST).
You can be fined $22,000 as an individual or $110,000 as a company under the Home Building Act 1989 for doing unlicensed work.
Applying for a licence or certificate
Licence types you can apply for
There are different types of licences available in NSW depending on whether you want to:
- contract to do the work,
- supervise work,
- do the work, or
- do a combination of these roles.
The licence types that apply to this category of work are:
- Individual contractor licence (or endorsed contractor licence)
- Company or partnership contractor licence
- Qualified supervisor certificate
You can apply for these licence types for 1, 3 or 5 years.
You can also get started with applying for your licence or certificate at Service NSW.
Time frames for licensing and registration applications
Find out about the current application processing times for different licence and registration categories.
Qualifications and experience needed
To get a licence or certificate to do carpentry, you must complete one of the qualifications listed below.
You must have completed one of the following:
- CPC30220 Certificate III in Carpentry, or
- CPC30211/ CPC30208/ BCG30203 Certificate III in Carpentry, or
- CPC32011/ CPC32008 Certificate III in Carpentry and Joinery, or
- BCG30798 Certificate III in General Construction (Carpentry — Framework/Formwork/Finishing), TAFE course #7078, or
- Qualification 10888 Certificate Ill in General Construction (Carpentry), Housing - Trade TAFE Course #2192, or
- Certificate III in Carpentry and Joinery Trade TAFE Course #2149, or
- Certificate Ill in Carpentry and Joinery Trade TAFE Course #5158.
You do not need to show your qualifications if you have
either:
- ever held an endorsed contractor licence or qualified supervisor certificate in carpentry that had no restrictions or conditions. If you apply for a new endorsed contractor licence or qualified supervisor certificate, we will accept your previous licence or certificate in place of the current qualification requirements.
or:
- held an endorsed contractor licence or qualified supervisor certificate in the last 5 years in carpentry that had restrictions or conditions. We will assess your application and reissue you a licence or certificate that reflects the scope of work that your licence or certificate covered. This may include some conditions or restrictions.
If your application is approved, you will be issued the same licence or qualified supervisor number you had before.
To find organisations that deliver nationally recognised training, go to https://www.yourcareer.gov.au/learn-and-train/courses and search via the course code or name.
If you are currently an apprentice or trainee, you cannot be issued with a licence or certificate. Once you have completed your apprenticeship or traineeship, you will need to apply for a contractor licence if you intend to do, or contract for, building or trade work.
If you hold a licence from interstate or New Zealand, and want to work in NSW, see Working interstate and mutual recognition.
This category of building and trade work is included under the NSW Automatic Mutual Recognition (AMR) scheme.
If you trained overseas, see Overseas trained applicants.
Do not make false or misleading claims
Providing false or misleading information is a serious offence.
If your license was obtained based on false or misleading information, you could face criminal prosecution, and your licence or certificate may be cancelled.
What would you like to do now?
Get in touch with Building Commission NSW
Need help with an application or want to know more about training and accreditation? Get in touch with Building Commission NSW.